GIRO bicycle helmet full face DISCIPLE INTEGRATED MIPS matte glacier dazzle GR-7087559

Disciple MIPS has many features like MIPS technology, excellent ventilation through 14 air vents and a P.O.V. camera mount that you will appreciate when going downhill. Disciple MIPS was built to meet DH standards as well as freeride, downhill and enduro. The Disciple MIPS® helmet has a fiberglass shell, soft inner lining and ventilated front holes for comfort. Meanwhile, the vinyl nitrile lining along the jaw line contributes to impact management in this critical area, while the P.O.V. camera mount and built-in loudspeaker pockets allow for sound and image selection. It also features an MIPS® system for redirecting impact energy, which can provide better protection for certain impacts. All in all, this is an impressive option for a new era of driving.

• Ventilation: Internal ducting, Targeted forehead ventilation, 14 air vents
• Certificates: CPSC Bicycle, ASTM-1952 DH
• Design: Customized injection-moulded gasket finish
• Match/adjustment system: Fit Kit lining (spare parts sets available)
• Sizes: XS:51-53cm, S: 54-56cm, M: 57-59cm, L: 60-63cm
  
  

Technology:

• MIPS - all Giro helmets are designed to reduce as much energy as possible, while meeting and exceeding strict safety standards. The aim of Giro helmets equipped with MIPS is to reduce rotational forces. Giro believes that helmets equipped with this technology can reduce the rotational force that can be transmitted to the cyclist's brain at specific impacts.
• Vinyl Nitrile (VN) - is a soft and flexible material with exceptional handling properties. Unlike expanded polystyrene foam (EPS), the action of which decreases with each subsequent impact, VN can return to its original state to continuously absorb more energy than a single impact if properly used.
• P.O.V. camera mount - our integrated POV camera mount system is safe and very easy to use, allowing you to immediately place the POV camera for filming or quickly slide it out and out.

ABOUT THE MIPS SYSTEM:

https://mipsprotection.com/

• MIPS - Multi-Directional Impact Protection System - This is a system that separates the helmet from the inner lining with a special extra layer placed on the flexible hooks. In short, it looks like an extra thin and fairly soft layer of plastic in the middle of the helmet, which slides slightly. This is where the inner sponges are attached to it. This system ensures that the forces that act on the cyclist's brain during a fall are reduced. MIPS is supposed to protect not only from vertical but also oblique impacts, and these are said to be the most dangerous for the head, even in a helmet. Within a few milliseconds the MIPS shell moves a few millimetres. The system looks quite inconspicuous, but it is thanks to it that, during a fall, the helmet will move at least on the head taking the whole impact.