SELLE ITALIA SLR TEKNO FLOW S Bicycle saddle, carbon, black

The SELLE ITALIA SLR TEKNO FLOW bicycle saddle is a combination of low weight and incredible strength, demonstrating continued popularity among professional and amateur cyclists. The best properties of carbon fiber combined with an attractive design have created a winning saddle.

• idmatch: S3
• Weight: 110g
• Dimensions: 275mm x 131mm
• Saddle rails: CarboKeramic 7mm x 9mm
• Purpose: road

Technologies:

• CARBO KERAMIC 7mm x 9mm
• three-dimensionally woven fiber inside the bars
• the optimal combination of the best combination of fibers
• Carbon rods covered with a ceramic coating to protect the clamp
• the lowest possible weight with maximum strength at the same time
• low weight of 29g
• cyclist weight limit of 100 kg

FIBRA-TEK
Durable and breathable synthetic leather cover.

LIGHT
The lowest possible weight with maximum durability.

SUPERFLOW CHANNEL
The new SuperFlow technology (specially enlarged anatomical cut-out) enables people of all sizes to always find the perfect and extremely comfortable position to rest on the saddle. In addition, the new Superflow drastically reduces all physical constraints caused by prolonged pressure on the pelvis that affects many cyclists, especially when riding long distances.

100% CARBON
The saddle shell is made of 100% carbon fiber.

What is ID Match?

A special computer program, written for this purpose by Selle Italia IT specialists, allows you to adjust the appropriate saddle model to the individual needs of the cyclist. The idea of ​​Italians is distinguished by the use of the so-called multi-phase measurement, for which it will be required to enter relevant data such as: age, sex, weight, height, distance traveled in the season, spine angle (position on the bike), pelvic bone spacing, thigh circumference, etc. into the aforementioned computer program. With idMatch in mind, a new Flite model was created, which, along with the system, was tested in the best Italian and Swiss stores and by the world leaders in cycling.

Details: We all know how difficult it is to get the right saddle to fit. And it is not about the basic determinant of comfort, which is the softness of the saddle, but probably the most important parameter, which is the width of the saddle. Narrow or wide? The question is important, too narrow a saddle will make us feel that we are sitting on the so-called. "Soft" parts of the body. Too wide will cause the feeling of sitting on the "couch" and a high probability of rubbing your thighs against the edges.

Saddle manufacturers went out to meet us by filling us with gel pillows that are to locate sciatic tumors or trying to determine the position of sciatic tumors through our elasticity. All these methods are quite effective, but they are based on one parameter, they are not completely accurate methods. Selle Italia with the IDMatch system decided to approach the subject more comprehensively and not to base the measurement system on only one parameter but on three, which gives more accurate results. The basis is the results of three measurements and the IDMatch system on the website.

The measurements are as follows: trochanteric width (this is the distance measured along the outside of the femurs), the circumference of the thigh and the position of the pelvis. Based on the measurement of the width between the trochanter, which is obtained with the help of a specialized ruler, we obtain the width between the ischial cusps, i.e. the parameter that determines the width of the saddle. The second parameter that is measured is the circumference of the thigh, it is especially important for people who narrow their knees while riding and rub their thighs against the saddle. The third and last is to measure the position of the pelvis with a forward inclination, this allows you to plot whether you need a saddle with or without a hole. The results of the above measurements are entered on the IDMatch website where, after making the calculations, the system suggests a suitable saddle for us. The saddles are divided into categories S1, S2, S3 and L1, L2, L3. Saddles from the S category are narrow, the L category are wide ones, the number after the letter means whether the saddle should be with a hole and how large.