SELLE ITALIA bicycle saddle butcher (id match - L2) 300g black SIT-030A801AEC001

Specific saddle, ideal for downhill, gravity, dirt jump and BMX driving. The middle part of the saddle absorbs impacts well, wide nose supports maximum control of the bike with a central hole the size of the hand, ideal for doing tricks. The hole can also be used to hang the bike on a ski lift or on a bicycle stand. There is a bottle opener under the saddle.

Technical properties:

• ideal for gravity, downhill, bmx, enduro
• large central hole the size of a hand to do tricks and increase control of the bike
• rounded back makes it easier to get in and out of the saddle
• anti-slip coating on the top and sides of the saddle
• short nose with extra soft padding
• very durable and anti-abrasive Duro-Tek coating
• idmatch: L2
• Weight: 300g
• Dimensions: 263mm x 138mm
• Saddle bars: FeC Alloy 7mm
• Purpose: downhill, gravity, dirt jump, bmx, enduro

Technology:

• BOTTLE OPENER
  A bottle opener placed under the saddle.
• DURO-TEK
  Very durable and anti-abrasive coating.
• EXTRA GRIP
  Anti-slip coating, herringbone bars for increased adhesion.
• FEC ALLOY 7mm
  Saddle bars made of steel with 7mm diameter.

What's an ID Match?

A special computer program written for this purpose by Selle Italia IT specialists, allows to adjust the appropriate model of the saddle to the individual needs of the rider. The idea of the Italians is distinguished by the application of the so-called multiphase measurement, for which it will be required to enter relevant data such as: age, sex, weight, height, distance covered in the season, spine angle (position on the bike), pelvic bone spacing, thigh circumference, etc. to the above-mentioned computer program. With a view to using idMatch, a new Flite model was created, which together with the system was tested in the best Italian and Swiss shops and by the world's leading cyclists.

Details: We all know how difficult it is to fit a suitable saddle. And it's not about the basic comfort factor, which is the softness of the saddle, but perhaps the most important parameter, which is the width of the saddle. Narrow or wide? The question is important, a saddle that is too narrow will make you feel that you are sitting on so-called "soft" parts of your body. Too wide will cause the feeling of sitting on the "couch" and a high probability of rubbing your thighs against the edges.

Saddle manufacturers have come up against us by planting gel pads to locate sciatic tumors or trying to determine the position of sciatic tumors through our elasticity. All these methods are reasonably effective but based on one parameter, they are not entirely accurate. Selle Italia with the IDMatch system has decided to approach the subject more comprehensively and not to base the measurement system on just one parameter but on three, which gives more accurate results. The basis is the results of three measurements and the IDMatch system on the website.

The measurements are measured as follows: the width between the twisters (this is the distance measured on the outside of the femur), thigh circumference and pelvic position. The measurement of the width between the corners is based on the width between the sciatic tumors, which is a parameter that determines the width of the saddle. The second parameter that is measured is thigh circumference, this is especially important for people who narrowly guide their knees while riding and rub their thighs against the saddle. The third and last parameter is measuring the position of the pelvis when leaning forward, this allows you to determine whether you need a saddle with or without a hole. The results of the above measurements are entered on the IDMatch page, where the system suggests a suitable saddle for us after the calculations. Saddles are divided into categories S1, S2, S3 and L1, L2, L3. Saddles in the S category are narrow saddles, the L category is wide saddles, a digit after a letter indicates whether the saddle should be with a hole and how big.