Check which bike rack will be suitable for your bike.

A bicycle rack is an additional bicycle equipment, which turns out to be invaluable especially during longer trips. When looking for the right model, you should pay attention to several important elements. First of all, the rack should be adapted to the type of bicycle.

we suggest, what bike rack to buy.

Bagażnik do gravela lub MTB full TOPEAK

photo. 1 - TOPEAK luggage carrier model Tetrarack mounted with Velcro. Dedicated to road, gravel or MTB Enduro / All-mountain bikes with "FULL" type suspension

Types of bicycle carriers

The basic classification of bicycle racks takes into account the method of attachment them to the bike frame:

Classic rear-mounted racks are applicable to frames that have the appropriate mounting holes. Most often it is mounted in four points - two on the frame near the axis of the rear wheel and two on the upper tubes of the rear triangle of the frame.

Bicycle racks on the seat post will work in the case no serial installation holese.g. in an MTB bike. They are characterized by a slightly lower payload than classic rear-mounted models.

Front racks for fork legs they are called lowriderami. Some models can be mounted directly through special installation holes, others are fastened with steel clamps.

Racks for disc brakes or regular are selected taking into account the size of the wheel. These types of models are mounted under the brake. Some are additionally equipped with handles that are attached to the upper tubes of the rear triangle of the frame for added stability.

Klasyczny bagażnik rowerowy  pod hamulce tarczowe

photo. 2 - classic carrier for disc brakes. Picture shows TOPEAK carrier with pannier MTX Trunkbag

Bagażnik rowerowy do sztycy podsiodłowej

photo. 3 Example seatpost bike rack integrated directly with the bicycle pannier. Of course, there are also the trunks themselves

What to look for when buying a bicycle rack?

One of the elements that is worth paying attention to when looking for the right bicycle rack is material of manufacture. Aluminum and steel models are popular. Manufacturers also offer structures made of titanium tubes, less often of plastic.

The material used in the manufacture of the boot affects its performance weight. basic model aluminum weighs approx. 600-900 grams and can carry weights up to approx. 25 kg. For trunks steel you should take into account a slightly higher weight (up to approx. 1800 grams), but also the possibility of transporting heavier loads - usually up to approx. 40 kg. Models titanium they combine low weight and relatively high load capacity. However, these are niche products, the purchase of which is associated with a slightly higher price. However, it is generally accepted that the maximum load of the luggage rack when cycling should be lower than that declared by the manufacturer.

They are also important types of fasteners that have been discussed above. The choice of the solution depends mainly on the model of the bike we have and how the bike rack can be attached to it.

How to choose a bicycle carrier?

Now we will try to suggest how to choose a bike carrier model.

First, you should check whether there are appropriate mounting holes in the bicycle frame. They should be located in the frame tubes near the rear wheel axle and in the vicinity of the crossbar connecting the seatstays.

The choice of trunk also depends on type of brakes. In the case of rim brakes, virtually any carrier fits the bike. The situation is different with disc brakes. Make sure that the brake caliper on the rear wheel does not obstruct the lower mounting hole of the boot. If that's the case, a rack mounted under disc brakes will be the best choice.

It is also important wheel size. Most manufacturers in the description include information about the wheel size for which the model of the bicycle rack was designed.

Seatpost models, on the other hand, fit almost any type of bike. They are inadvisable only for fulli with a large stroke of the rear suspension.

Choosing the right model of a bicycle rack depends on several elements. It is worth analyzing carefully over what distances and with what load we intend to move. To a large extent, however, the choice of model depends on what solutions the bike is equipped with - including whether it has special mounting holes.

List of the 12 most popular models of bicycle carriers

add comment

Fields marked (*) are required We will process your data in accordance with our Privacy policy.